Senshine products
Shenglihong products
CEMS online analyzer SLH-CEMS1921
Overview
The analysis system is based on the ultraviolet differential analysis method, which can monitor the parameters of carbon dioxide, nitrogen oxides, oxygen, humidity, temperature, pressure, flow rate, etc. in the gas. It can be widely used in various industries and continuous monitoring of gas components emitted by waste incineration. . In addition, the system can detect CO\CO2\NO2\HCL\NH3\H2S\CL2, VOC and other gases for specific occasions.
System parameters
Size: 2000mm×800mm×600mm Weight: about 100kg
Measurement parameters: SO2, NO, NO2, O2, temperature, pressure, flow rate, humidity
Heat tracing pipeline temperature: 120℃~200℃
Probe heating temperature: 120℃~200℃
Protection level: cabinet IP42, other IP65
Power supply: 220VAC, 1500w (when 30 meters of heating pipeline)
Ambient temperature: -20℃~50C (the cabin must be equipped with air conditioning)
Environmental humidity: 5%Rh-95%Rh (non-condensing)
External output: 4-20mA, RS485
Compressed air requirements: 0.4~0.7MPa, 0.25m/min, clean and oil-free
Range and principle parameters
| parameter | Range | Measuring principle |
| SO2 | (0-50ppm)~(0-100%) | UV absorption spectrum |
| NO | (0-50ppm)~(0-100%) | UV absorption spectrum |
| NO2 | (0-50ppm)~(0-100%) | UV absorption spectrum |
| O2 | 0-25% | Electrochemistry |
| humidity | 0-100% | Humidity Capacitor |
| dust | (0-50mg/m3)~(0-50gm3) | Laser backscatter |
| Flow rate | 0-40m/s（customizable) | Pitot tube |
| temperature | 0-300°(customizable) | Thermal resistance |
| pressure | -30kPa - 30kPa(customizable) |
WRITE A MESSAGE TO US
Quick navigation
Contact us
ADD: No. 25, Hengluo Road, Henglin Town, Economic Development Zone, Changzhou City, Jiangsu Province
MOB: 15261189520 (Mr. Zhu)
TEL: 0519-88506962
FAX: 0519-88507962
Follow us
Online message
Copyright © 2021 Changzhou Senshine Intelligent Technology, Co., Ltd.. Powered by www.300.cn 苏ICP备15026250号-2 IPV6